This single row angular contact ball bearing transmits combined radial and axial loads in one direction through its 40° contact angle raceway design. Bore diameter is 40.0 mm, outside diameter 80.0 mm, width 18.0 mm, mass 0.367 kg. The X-life design raises internal geometry precision, and the TVP cage is a solid plastic cage guiding the ball set. Limiting speed is 11900 1/min, reference speed 8600 1/min. Due to the single-direction angular contact geometry, this bearing is typically mounted in pairs to take up axial loads from both sides and to control shaft positioning under preload. The plastic TVP cage runs with low friction and supports the higher limiting speed values stated, making the bearing suited for arrangements where axial guidance combined with radial load capacity at these speed levels is required.