This deep groove ball bearing carries radial and moderate axial loads on a single row of balls, with a bore of 50.0 mm, outside diameter of 110.0 mm, and width of 27.0 mm. It is built as Generation C design with a steel sheet metal cage, seals on both sides (2HRS), and has a mass of 1.084 kg. Limiting speed is rated at 5800.0 1/min. The C3 radial internal clearance (Group 3) allows the bearing to compensate for tighter fits and thermal expansion during operation, keeping running clearance within the intended range. The seals on both sides retain grease inside the bearing and block dirt and moisture from entering, so it suits applications where relubrication access is limited. The steel sheet metal cage guides the balls at the rated speed without adding unnecessary mass to the assembly.