Carries radial loads and moderate axial loads in a compact single-row design with a bore of 45.0 mm, outside diameter of 100.0 mm, and width of 25.0 mm. The bearing weighs 0.84 kg and is rated for a limiting speed of 6400 1/min. It is built to Generation C internal geometry, fitted with seals on both sides, and uses a steel sheet metal cage (JN). Radial internal clearance is C3, wider than the standard group. The integrated seals keep grease in and contaminants out, so the bearing runs pre-lubricated and requires no external lubrication line. The C3 clearance compensates for the temperature rise caused by the seals and for a tight interference fit on the shaft or in the housing, keeping the raceway from binding under normal operating loads. This combination suits applications where sealed, low-maintenance operation at moderate speeds is required.