This deep groove ball bearing carries radial and moderate axial loads in a single row configuration, with a bore diameter of 25.0 mm, outside diameter of 62.0 mm, and width of 24.0 mm. Net mass is 0.316 kg, and the limiting speed reaches 7300 1/min. The bearing uses a steel sheet metal cage (JN) and features seals on both sides (2RSR), which keep grease inside and block contaminants from entering the raceway. The C3 radial internal clearance is wider than standard, compensating for thermal expansion during operation and allowing use where operating temperature raises the effective fit between the inner ring and shaft. As a sealed unit, it is factory lubricated with grease and requires no relubrication during service life. The construction is suited for applications where a maintenance-free, contamination-protected bearing with increased internal clearance is required at the given shaft diameter.