Technical data
34 parametersIdentification
- Manufacturer
- FAG
- Type
- Deep groove ball bearing
- Part number (SKU)
- 6218-2RSR-C3#N1
- EAN
- 4026677049483
- Cage
- JN
- Tolerance class
- PN
Dimensions
- Bore d
- 90 mm
- Outside diameter D
- 160 mm
- Width B
- 30 mm
- Mass
- 2.29 kg
- Radial clearance
- C3 (Group 3)
Load ratings and operation
- Dynamic load rating C
- 102000 N
- Static load rating C₀
- 74000 N
- Limiting speed
- 2380 1/min
Full manufacturer specification20 parameters · expand
- Bore type
- Z
- Cage
- JN
- Calculation factor
- 14.6
- Dimensional / heat stabilization
- S0
- Fatigue load limit, radial
- 4500.0 N
- Inner ring shoulder diameter
- 112.25 mm
- Lubricant
- GA13
- Max. operating temperature
- 100.0 °C
- Maximum fillet radius
- 2.0 mm
- Maximum housing shoulder diameter
- 149.0 mm
- Min. operating temperature
- -20.0 °C
- Minimum chamfer
- 2.0 mm
- Minimum shaft shoulder diameter
- 101.0 mm
- Outer ring caliber diameter
- 143.42 mm
- Outer ring shoulder diameter
- 138.84 mm
- PFAS
- no
- Radial internal clearance
- C3 (group 3)
- REACH
- REACH compliant
- RoHS
- RoHS compliant
- Type of seal
- 2RSR
Classification
- Manufacturer category
- Rolling and Plain Bearings › Ball Bearings › Deep Groove Ball Bearings
- eCl@ss class
- 23-05-08-01
- UNSPSC
- 31171502
Description
This deep groove ball bearing carries radial and combined loads in a single row of balls, with a bore of 90.0 mm, outside diameter of 160.0 mm, and width of 30.0 mm. Net mass is 2.29 kg, and the limiting speed is 2380.0 1/min. The bearing is sealed on both sides (2RSR) and fitted with a steel sheet metal cage (JN), giving a net mass of 2.29 kg. Radial internal clearance is C3 (Group 3), wider than standard clearance. The C3 clearance compensates for thermal expansion and interference fit effects during operation, allowing the bearing to run without excessive preload under moderate temperature rise. The two-side sealing (2RSR) retains grease inside the bearing and blocks contaminants from entering, making relubrication unnecessary under normal conditions. Equivalent parts are SKF 6218-2RS1/C3, NSK 6218DDUC3, and NTN 6218LLUC3.
The same bearing from other manufacturers (4 designations)
Same size and design — suffix notation differs between brands.
FAG
6218-2RSR-C3
original — this page
equivalent designation
SKF
6218-2RS1/C3
STEYR
6218-2RS1/C3
NSK
6218DDUC3
NTN
6218LLUC3
This is a dimensional and design equivalent, not the same product. If in doubt, ask us before ordering.
6218-2RSR-C3
Common designation: 6218 2RS C3
Deep groove ball bearing
⌀90 × 160 × 30 mm
od EUR 77.57net
+ VAT 23% = EUR 95.41 gross
Cheaper in larger quantities
| from 5 pcs | EUR 76.12 | −2% |
| from 10 pcs | EUR 75.35 | −3% |
| from 25 pcs | EUR 73.79 | −5% |
| from 50 pcs | EUR 72.24 | −7% |
Dispatched within 24 h from our own warehouse
Shipping within the EU: DHL, GLS, from EUR 13.18 net. Transit time 3–5 business days after dispatch. Shipping and returns →
Buying for a company?
Open a business account →Documentation
Datasheet (PDF)RoHS / REACH compliance declaration (PDF)Opening a document for the first time can take up to a minute while the manufacturer prepares it.
