Carries radial loads in a thin-section single row deep groove ball bearing design with seals on both sides, bore 85.0 mm, outside diameter 110.0 mm, width 13.0 mm, net mass 350.0 g. The cage is a brass sheet metal type (Y), radial internal clearance is CN (Group N), and the limiting speed reaches 2850 1/min. The integrated seals retain grease inside the bearing and keep contaminants out, so no external sealing arrangement is required and relubrication intervals can be extended. The brass sheet metal cage gives stable ball guidance at the rated speed, while the CN clearance suits standard mounting conditions without additional preload. The thin cross-section makes this bearing suitable where radial space is limited but the bore diameter of 85.0 mm must be maintained.