Supports radial load on a single row of balls, with limited axial load capacity in both directions. Bore diameter is 150 mm, outside diameter 225 mm and width 35 mm, with a net mass of 4.32 kg. The ball set is guided by a sheet steel cage, designation JN, and the bearing is ceramic coated. The bore is listed as type Z. Radial internal clearance is C3, that is greater than Normal, which preserves running clearance where tight fits or a temperature difference between inner and outer ring reduce it after mounting. Reference speed is 3850 1/min and limiting speed 3950 1/min; the latter is the mechanical limit of the bearing and depends on the lubrication and mounting conditions provided.