This deep groove ball bearing carries radial and moderate axial loads on a single row of balls guided by a steel sheet metal cage (JN). Bore diameter is 35.0 mm, outside diameter 62.0 mm, width 14.0 mm, and net mass 0.153 kg. Both sides are fitted with metal shields (2Z), and the internal clearance falls in C3 (Group 3), wider than standard. Limiting speed is rated at 13700 1/min, with a reference speed of 11700 1/min. The C3 clearance compensates for thermal expansion and interference fit effects on the shaft or housing, keeping the bearing from running too tight under load or temperature rise. Metal shields on both sides retain grease and keep out coarse contaminants, though they do not provide a full seal against fine dust or liquids. The steel sheet metal cage suits the rated speed range without adding significant mass, and the bore type Z designation confirms the shielded configuration on both faces.