This tapered roller bearing transmits combined radial and axial loads through a single row of tapered rollers arranged between a cone and cup, with main dimensions to DIN 720. Bore diameter is 80.0 mm, outside diameter 130.0 mm, net mass 1.889 kg, and the limiting speed reaches 5200 1/min. The cage is of standard design, and the bearing is separable, allowing independent mounting of the inner and outer rings. The separable construction simplifies fitting and adjustment of the internal clearance during assembly, since axial position can be set after the cone and cup are installed. Its single-row tapered geometry makes it suitable for shaft arrangements where load is applied in one direction and where axial preload or clearance needs to be set precisely. Lubrication with oil or grease is possible depending on the sealing arrangement chosen for the housing, and the standard cage supports operation at the stated limiting speed under normal mounting conditions.