This tapered roller bearing carries combined radial and axial loads through a single row of tapered rollers set between a separable cone and cup assembly. Main dimensions follow DIN 720, with a bore diameter of 90.0 mm, outside diameter of 160.0 mm, and a net mass of 3.474 kg. The bearing is fitted with a standard cage and permits a limiting speed of 5300.0 1/min. The separable construction allows independent mounting of the inner and outer rings, simplifying assembly and enabling axial clearance adjustment during fitting. The tapered geometry provides support for shaft loads acting in one axial direction combined with radial forces, and the design accommodates the internal clearance setting required for proper contact angle and load distribution. As with this bearing type, correct axial preload or clearance must be established at mounting, and lubrication should be selected according to the operating speed and temperature conditions expected in service.