This double row angular contact ball bearing carries loads simultaneously in radial and axial directions from both sides, with the two rows arranged to take up combined loading without needing a paired bearing set. Bore diameter is 40.0 mm, outside diameter 80.0 mm, width 30.2 mm, and net mass 0.59 kg. It belongs to the X-life design, giving increased load carrying capacity within the same envelope dimensions. Limiting speed is 6700.0 1/min, reference speed 9100.0 1/min. The cage is designated TVH, a glass fibre reinforced plastic cage guided on the rolling elements. The bearing is fitted with shields on both sides (2Z), protecting the internal geometry from contact contamination while allowing grease retention inside the bearing for its service life. The C3 internal clearance compensates for temperature rise and interference fits during operation, keeping the bearing free of excessive preload under shaft and housing tolerances. The combination of double row design and shields makes this bearing suitable for shaft positions requiring both radial and axial guidance from a single unit, without the need for external sealing or a second bearing to take up axial load in the opposite direction.