This tapered roller bearing carries combined radial and axial loads through a single row of tapered rollers set between an inner and outer ring at an angle, with the two ring assemblies separable for mounting. Main dimensions follow DIN 720: bore diameter 25.0 mm, outside diameter 62.0 mm, net mass 264.13 g. The cage is of standard design, and the limiting speed is 12000 1/min. Because the inner and outer ring assemblies separate, the bearing can be mounted with the inner ring pressed onto the shaft and the outer ring fitted into the housing independently, allowing internal clearance to be set during assembly. The single-row tapered arrangement makes it suited to shaft positions where combined radial and one-directional axial load must be taken up through a single bearing, with axial load capacity dependent on the contact angle built into the 313-series geometry.