This single-row tapered roller bearing carries tapered inner and outer ring raceways set at an angle to the bearing axis, allowing it to take combined radial and axial loads acting in one direction. Main dimensions follow DIN 720, with a bore diameter of 70.0 mm, outside diameter of 125.0 mm, and net mass of 1.285 kg. The design is separable, so the cone assembly and cup can be mounted independently, which simplifies fitting and adjustment of internal clearance. The cage is of standard design, and the limiting speed is rated at 7100 1/min. Because the inner and outer rings can be handled separately, axial clearance can be set precisely during mounting to match the required preload or operating clearance. The tapered contact geometry makes this bearing suitable for shaft arrangements where axial positioning and combined loading must be controlled through paired or opposed mounting. As with all bearings of the 302 series, correct alignment and adjustment during assembly are needed to achieve the intended load distribution across the rollers.