This angular contact ball bearing carries combined radial and axial loads thanks to its double-row design, with contact angles acting on both sides of the raceway. Bore diameter is 12.0 mm, outside diameter 28.0 mm, and width 12.0 mm, giving a compact cross-section for shaft seats requiring angular contact support in a limited envelope. The cage is made of plastic, designation TVH, which reduces friction and mass — net mass of the bearing is 0.032 kg. Limiting speed reaches 29500 1/min, while the reference speed is 19300 1/min, indicating the thermally safe continuous operating range under normal load conditions. The double-row arrangement allows the bearing to take up axial loads from both directions without needing a paired second bearing, simplifying shaft fixation at a single point. The plastic TVH cage supports smooth ball guidance at higher speeds within the stated limiting and reference values, and is suited to applications where low friction and moderate operating temperatures are expected. As no sealing variant is specified, the bearing should be mounted with external sealing or in a protected housing to control lubricant retention and contamination ingress.