This spherical roller bearing accommodates radial loads together with axial loads acting in both directions, while its self-aligning design compensates for shaft deflection and housing misalignment. Main dimensions follow DIN 635-2: bore diameter 360.0 mm, outside diameter 600.0 mm, width 243.0 mm, net mass 263.5 kg. The bore is tapered at a ratio of 1:30 (K30), allowing mounting on a tapered shaft seat or with an adapter/withdrawal sleeve. Limiting speed is 890.0 1/min, reference speed 350.0 1/min. The cage is a machined brass cage, design JPB. Internal clearance is C3, providing increased clearance to offset the interference fit resulting from mounting on a tapered seat and to account for thermal expansion during operation. The design corresponds to the BE series with modified internal geometry for higher load rating. Relubrication follows the standard feature, without an integrated relubrication device, so lubricant replenishment intervals must be planned according to operating conditions and speed.