This bearing carries axial loads acting in both directions from a single row set, a double direction angular contact ball bearing design with a separable arrangement for mounting convenience. Bore diameter is 95.0 mm, outside diameter 145.0 mm, width 60.0 mm, and net mass 3.036 kg. The cage is brass, machined, symbol M, and the bearing is manufactured to restricted tolerances for tighter running accuracy than standard tolerance class. The double direction design allows the bearing to take axial loads from both sides while requiring a separate radial bearing to guide the shaft, as it does not carry radial load itself. The separable construction simplifies mounting and dismounting, since inner and outer rings with their ball and cage assemblies can be handled independently during installation. Restricted tolerances make this bearing suitable for applications where precise axial positioning and minimal axial play under load are required, and the brass cage supports stable ball guidance at the speeds typical for this bearing size.