Compensates angular misalignment through its two-row spherical roller and raceway geometry, with a 300 mm bore, 500 mm outside diameter and 160 mm width, weighing 121 kg. The design is symmetric with two outer ribs and a rib washer, tapered bore (K) for mounting on an adapter or withdrawal sleeve, and machined brass cage MB1. Limiting speed is rated at 1300 1/min, reference speed at 720 1/min, and tolerance class corresponds to C5 internal clearance. The tapered bore simplifies mounting and dismounting on a sleeve while allowing precise control of internal clearance during fitting. The C5 clearance combined with the spherical roller design accommodates shaft deflection and housing misalignment without loss of load distribution across the rollers. Standard relubrication feature allows grease replenishment during operation, suiting applications where the bearing runs continuously under radial and moderate axial loads at the specified speed range.