This spherical roller bearing accommodates radial loads together with axial loads in both directions while tolerating shaft misalignment, making it suitable where deflection or alignment error under load must be absorbed without transmitting stress to the shaft. Symbol 23072-BEA-XL-K-MB1-C3 has a bore diameter of 360.0 mm, outside diameter of 540.0 mm, and width of 134.0 mm, with a net mass of 103.2 kg. The design is symmetric BEA with two outer ribs and a rib washer, a tapered bore (K) for mounting on an adapter or withdrawal sleeve, and a machined brass cage (MB1). Limiting speed is rated at 1300.0 1/min, with a reference speed of 790.0 1/min. The C3 radial internal clearance provides increased play to compensate for interference fit and thermal expansion during operation, keeping the bearing within its intended operating clearance once mounted and up to temperature. The tapered bore with K designation allows for controlled fit adjustment via axial displacement on the shaft, while the MB1 cage supports stable roller guidance under the specified speed range. Standard relubrication feature indicates the bearing is designed for periodic replenishment of grease through its lubrication provisions during service.