This angular contact ball bearing carries axial loads from both directions through a double-direction arrangement, with the two rows arranged back to back within a single unit. Bore diameter is 15.0 mm, outside diameter 45.0 mm, and width 25.0 mm, with a net mass of 0.219 kg. The design has no screw mounting, so the bearing is fitted directly onto the shaft and into the housing without additional fixing screws. Sealing on both sides (2RS) keeps grease inside the bearing and blocks contaminants from entering, so the bearing runs with grease lubrication and needs no external oil supply. The double-direction layout allows it to take axial loads acting in either direction along the shaft axis, making it suitable where a compact axial bearing arrangement combining both load directions in one component is needed.