This combined needle roller/cylindrical roller bearing carries radial and single-direction axial loads within one unit, following DIN 5429 design. Bore diameter is 15.0 mm, outside diameter 24.0 mm, height 23.0 mm, and net mass 41.38 g. The bearing has no end cap and is designed for oil lubrication. Limiting speed is rated at 13000 1/min, with a reference speed of 6500 1/min. The design has no integrated seal, so oil lubrication must be supplied through the housing and kept clean at the mounting location. The axial cylindrical roller bearing part handles thrust load in one direction only, so the counterface must be arranged accordingly, and correct axial location of the shaft assembly is required during mounting. Without an end cap, the assembly must be secured axially by the surrounding housing design to keep the roller and cage set correctly located during operation.