Guides a mating track along a solid roller stud fixed by a threaded end, transferring load through a full complement needle roller set running against a particularly thick-walled outer ring. The outer diameter is 30.0 mm, overall width 40.0 mm, and net mass 0.092 kg. An eccentric collar on the stud allows adjustment of the running clearance against the mating track, while axial guidance of the outer ring is provided by plastic axial plain washers together with the contact flange and contact washer. Sealing on both sides is realized by the plastic axial plain washers acting as a three-stage seal (PP), keeping contamination away from the needle roller set without adding running resistance from external seals. This needle roller bearing design suits applications where the roller stud is mounted directly into a support and the outer ring must roll under load while its axial position stays fixed by the plastic washer arrangement; the eccentric collar simplifies setting of the correct radial clearance during installation.