This needle roller bearing is designed as a stud type track roller with a solid roller stud, fixing thread and a mounting aid for installation. The outer ring is particularly thick-walled and carries a full complement needle roller set, giving an outside diameter of 16.0 mm and a width of 28.0 mm at a net mass of 19.921 g. Axial guidance of the outer ring is achieved through plastic axial plain washers together with a contact flange and contact washer, and the design includes an eccentric collar. Sealing is provided in three stages by plastic axial plain washers (PP) on both sides, which keeps contaminants out of the raceway while the outer ring rotates against the fixed stud. The eccentric collar allows adjustment of the track clearance during mounting, and the fixing thread on the stud permits direct bolting without a separate housing.