KRE32-PP-A is a needle roller bearing designed as a stud type track roller, built with a particularly thick-walled outer ring running on a needle roller and cage assembly. The roller stud is solid, fitted with a fixing thread and a mounting aid, and carries an eccentric collar. Axial guidance of the outer ring is provided by plastic axial plain washers together with a contact flange and contact washer. Outside diameter is 32.0 mm, width 40.0 mm, and net mass is 0.099 kg. Sealing is achieved in three stages by plastic axial plain washers on both sides (PP), keeping contaminants away from the needle roller set while the outer ring runs directly on the track. The eccentric collar allows adjustment of the roller position relative to the mating track, and the solid stud with fixing thread and mounting aid simplifies alignment and fixing during installation.