This needle roller bearing guides a load along a track through a single row of needle rollers running on a particularly thick-walled outer ring, with an outside diameter of 32.0 mm and a net mass of 0.094 kg. The solid roller stud has a fixing thread and a mounting aid, allowing direct bolted installation without a separate housing. Axial guidance of the outer ring is provided by plastic axial plain washers together with a contact flange and contact washer, without an eccentric collar. Sealing is arranged in three stages using plastic axial plain washers on both sides, marked as PP, which keeps contamination away from the needle roller and cage assembly and retains lubricant within the raceway area. The design suits applications where the roller runs directly on a track surface and where axial location must be maintained without additional retaining elements, provided that mounting follows the stud's fixing thread and centring guide.