Full complement of needle rollers running in a drawn cup with an open end provides high radial load capacity within a limited radial section, achieved through a thin-walled outer ring formed by cold drawing. The bearing carries a cage, has an outside diameter of 32.0 mm, a width of 26.0 mm, and a net mass of 43.515 g. Limiting speed is rated at 10200 1/min, with a reference speed of 7300 1/min. The open-end design allows the shaft to pass through both sides of the cup, which suits applications requiring axial positioning from either end. As the bearing is supplied without sealing, the mounting location must provide protection against contamination, and lubrication has to be supplied externally through the housing or shaft arrangement. The cage-guided needle rollers reduce friction compared with full-complement designs, making the bearing suitable where radial stiffness is needed within a compact envelope.