This split pillow block housing supports a shaft with two bearing seats mounted on a single common base, allowing both bearing positions to be aligned along one line. The bore diameter d is 48 mm, with shaft shoulder diameter da at 60 mm. The housing, cap, and grease-guiding disc are made of grey cast iron GG 20. Mounting dimensions read from the drawing include A = 460 mm, D = 130 mm, H = 80 mm, J = 210 mm, L = 260 mm, N = 19 mm, b = 70 mm, w = 68.0 mm, A1 = 383.5 mm, A2 = 334.0 mm, A3 = 476 mm, H1 = 165 mm, H2 = 25 mm, J1 = 340 mm, L1 = 696 mm, L2 = 437 mm. Both bearing positions are equipped with grease nipples, allowing relubrication without disassembly of the housing. The unit is supplied with seals fitted at both bearing seats, protecting the bearing positions from contamination during operation. The two-seat, single-shaft cast housing design keeps both bearing locations fixed relative to one another on a common base, which supports shaft alignment across the span defined by the listed length dimensions.