This bearing housing supports a shaft with two bearing seats on a single base, allowing both bearing positions to be aligned on one common line. The bore diameter (d) is 28 mm. Further dimensions read from the catalogue drawing: A = 260 mm, D = 80 mm, H = 60 mm, J = 150 mm, L = 190 mm, N = 15 mm, b = 45 mm, w = 49.5 mm, A1 = 195.5 mm, A2 = 160.0 mm, A3 = 274 mm, H1 = 116 mm, H2 = 18 mm, J1 = 175 mm, L1 = 394 mm, L2 = 239 mm, da = 35 mm. The housing, cover, and grease-guiding plate are made of grey cast iron GG 20. Both bearing positions are fitted with grease nipples, allowing regrease of each seat independently once mounted. The units are supplied complete with seals, which keep contamination away from the bearing seats and retain grease within the housing during operation. The two-seat single-shaft layout lets both bearing positions be set up with a shared shaft line, which is the configuration the manufacturer lists this housing series for.