Technical data
47 parametersIdentification
- Manufacturer
- INA
- Type
- Rod end
- Part number (SKU)
- GIR40-DO-2RS#N1
- EAN
- 4012802526967
Dimensions
- Bore d
- 40 mm
- Outside diameter D
- 62 mm
- Mass
- 2.03 kg
- Radial clearance
- CN (Group N)
Load ratings and operation
- Dynamic load rating C
- 129000 N
- Static load rating C₀
- 194000 N
- Sealing
- 2RS
Full manufacturer specification36 parameters · expand
- Ball diameter
- 53.0 mm
- Bore diameter bearing, lower tolerance
- -0.012 mm
- Bore diameter bearing, upper tolerance
- 0.0 mm
- Clampable
- Not clampable
- Distance drilling with/shaft start
- 48.0 mm
- Edge Spacing
- 0.6 mm
- Inner ring width
- 28.0 mm
- Length rod end shank
- 18.0 mm
- Lubrication nipple
- DIN71412-AS6 (tapered grease nipple)
- Maintenance
- Maintenance required
- Max. operating temperature
- 130.0 °C
- Min. operating temperature
- -30.0 °C
- Mounting
- Internal thread
- Outer eye diameter
- 92.0 mm
- Outer flange diameter inner ring
- 45.0 mm
- PFAS
- no
- Radial Clearance
- 0,043 - 0,12
- Radial clearance, maximum
- 0.12 mm
- Radial clearance, minimum
- 0.043 mm
- Radial internal clearance
- CN (group N)
- REACH
- REACH compliant
- RoHS
- RoHS compliant
- Sealing
- 2RS
- Shank diameter
- 52.0 mm
- Shank diameter, large
- 65.0 mm
- Shank Length Internal thread head
- 142.0 mm
- Slotted
- no
- Thread length Internal thread
- 65.0 mm
- Thread Pitch
- Right-hand thread
- Thread size
- M39x3
- Tilt angle
- 7.0 °
- Total length internal thread head
- 188.0 mm
- Width Across Flat
- 55.0 mm
- Width inner ring, lower tolerance
- -0.12 mm
- Width inner ring, upper tolerance
- 0.0 mm
- Width of the rod end
- 23.0 mm
Classification
- Manufacturer category
- Rolling and Plain Bearings › Plain Bearings › Rod Ends › Rod Ends, maintenance required
- eCl@ss class
- 23-05-01-05
- UNSPSC
- 31171508
Description
Transmits axial and radial loads between a threaded rod and a pin while allowing angular movement of the joint. The housing carries an internal right-hand thread, and the sliding contact surface is steel on steel, built to DIN ISO 12240-4, dimension series E, type F. Radial internal clearance is CN (Group N), sealing is 2RS, and net mass is 2.028 kg. The steel/steel sliding pair requires maintenance, so relubrication with grease through the service interval must be planned at installation. The 2RS seals retain lubricant and keep contaminants off the contact surface. Dimensionally and structurally interchangeable with HUNGER GK40LS.
The same bearing from other manufacturers (1 designations)
Same size and design — suffix notation differs between brands.
INA
GIR40-DO-2RS
original — this page
equivalent designation
HUNGER
GK40LS
This is a dimensional and design equivalent, not the same product. If in doubt, ask us before ordering.
GIR40-DO-2RS
Rod end
⌀40 × 62 mm
od EUR 159.83net
+ VAT 23% = EUR 196.59 gross
This item is brought in to order (about 10 working days) and we sell it to business customers. Open a business account.
Cheaper in larger quantities
| from 5 pcs | EUR 156.63 | −2% |
| from 10 pcs | EUR 155.03 | −3% |
| from 25 pcs | EUR 151.84 | −5% |
| from 50 pcs | EUR 148.64 | −7% |
Our own item, temporarily out of stock — write to us for a date.
Shipping within the EU: DHL, GLS, from EUR 13.16 net. Transit time 3–5 business days after dispatch. Shipping and returns →
Buying for a company?
Open a business account →Documentation
Datasheet (PDF)RoHS / REACH compliance declaration (PDF)Opening a document for the first time can take up to a minute while the manufacturer prepares it.