Technical data

41 parameters

Identification

Manufacturer: INA
Type: Spherical plain bearing
Part number (SKU): GE40-AW-A#N1
EAN: 4012802532517

Dimensions

Bore d: 40 mm
Outside diameter D: 105 mm
Mass: 1.62 kg

Load ratings and operation

Dynamic load rating C: 1120000 N
Static load rating C₀: 1870000 N

Full manufacturer specification32 parameters · expand

Ball diameter: 114.0 mm
Basic dynamic load rating, axial: 1120000.0 N
Basic static load rating, axial: 1870000.0 N
Bore diameter bearing, lower tolerance: -0.012 mm
Bore diameter bearing, upper tolerance: 0.0 mm
Bore diameter of housing washer: 59.0 mm
Coating: without
Connection measure Inner ring: 78.0 mm
Edge Spacing: 0.3 mm
Fabric: ELGOGLIDE
Front surface diameter of shaft washer: 78.0 mm
Height: 32.0 mm
Height, lower tolerance: -0.4 mm
Height, upper tolerance: 0.0 mm
Housing Connection Diameter: 64.0 mm
Inner ring width: 27.0 mm
Maintenance: Maintenance free
Max. operating temperature: 150.0 °C
Min. operating temperature: -50.0 °C
Outer eye diameter: 98.0 mm
Outer ring width: 22.0 mm
Outside diameter, lower tolerance: -0.015 mm
Outside diameter, upper tolerance: 0.0 mm
PFAS: yes
Plane Surface Spacing: 24.5 mm
REACH: REACH compliant
RoHS: RoHS compliant
Tilt angle: 6.0 °
Width inner ring, lower tolerance: -0.24 mm
Width inner ring, upper tolerance: 0.0 mm
Width outer ring, lower tolerance: -0.24 mm
Width outer ring, upper tolerance: 0.0 mm

Classification

Manufacturer category: Rolling and Plain Bearings › Plain Bearings › Spherical Plain Bearings › Spherical Plain Bearings, maintenance free
eCl@ss class: 23-05-01-06
UNSPSC: 31171515

Description

This plain bearing accommodates axial loads while allowing angular misalignment between shaft and housing thanks to its spherical sliding surface. The design is maintenance-free, built to DIN ISO 12240-3, with a shaft location washer featuring a curved surface finished with a hard chromium coating. The bearing has an open design, a height of 32.0 mm, and a net mass of 1.621 kg. The hard chromium coating on the curved surface improves sliding properties and wear resistance, supporting stable operation under axial loading. As the design is maintenance-free, no relubrication is required during service, which simplifies installation where periodic access for lubrication would be impractical. The open design allows direct visual inspection of the sliding surface during mounting and maintenance checks.

INA