This spindle bearing is designed for precision applications requiring accurate axial and radial guidance under a 25° contact angle. The bore diameter is 65.0 mm, outside diameter 120.0 mm, and width 23.0 mm, with a net mass of 0.985 kg. It is fitted with a T cage and non-contact lip seals on both sides, protecting the bearing interior from contamination while minimizing friction. The bearing is manufactured to restricted tolerances (P4S) and supplied adjusted, for mounting in pairs or sets. The 25° contact angle allows the bearing to carry combined loads with a defined stiffness in both axial directions, which is relevant when mounted in matched sets requiring a defined preload. The restricted tolerance class supports high running accuracy and low radial runout, while the non-contact seal design allows operation at higher speeds without added torque compared to contact-type seals. The bearing is intended for grease or oil lubrication, as appropriate to the mounting arrangement and preload setting selected for the paired or set configuration.