This single row angular contact ball bearing carries radial and axial loads acting in one direction, with the contact angle setting up the load-carrying capacity of the raceway system. Bore diameter is 95.0 mm, outside diameter 200.0 mm, width 45.0 mm, and net mass 5.77 kg. The X-life design raises load rating within the same envelope dimensions. The cage is a solid plastic TVP type, guided on the balls, running with low friction and permitting a limiting speed of 4400 1/min and a reference speed of 3800 1/min. Due to the single-row angular contact design, the bearing should be mounted in pairs or against a counter-bearing to take up axial loads from both directions, with preload or clearance set according to the mounting arrangement. The plastic cage reduces mass and heat generation compared to a metal cage, supporting the stated speed ratings, and is suited to grease or oil lubrication under normal operating conditions. Shaft and housing fits should be selected to keep the working internal clearance within the intended range for the application.