This angular contact ball bearing carries combined radial and axial loads through a double row of balls set at a contact angle, providing rigid support along the shaft axis. Bore diameter is 8.0 mm, outside diameter 22.0 mm, width 11.0 mm, and net mass 0.022 kg. The limiting speed reaches 21200 1/min, and the cage is a plastic type, marked TVH, which reduces friction and mass compared to a machined cage. Seals on both sides (2RS) retain grease and keep out contaminants, so the bearing operates without additional external protection once mounted. The double-row design allows it to take axial loads from both directions and gives more rigidity than a single-row angular contact bearing of similar size, suitable where compact axial positioning of the shaft is required alongside radial support.