This spherical roller bearing accommodates axial loads while allowing self-alignment through its spherical roller and raceway geometry. Bore diameter is 110.0 mm, outside diameter 190.0 mm, and height 48.0 mm, with a net mass of 5.06 kg. The design has no flanging ring. It runs with a JP cage, permitting a limiting speed of 3750 1/min and a reference speed of 1840 1/min. The absence of a flanging ring allows the bearing to accept axial displacement between the housing and shaft washers, which is useful where some axial float must be compensated without inducing additional constraint on the roller set. The spherical roller and raceway contact geometry compensates for angular misalignment between the shaft and housing, making the bearing suitable for applications where axial load must be carried under such misalignment conditions. The JP cage guides the rollers within the specified speed limits stated above.