UCP213-40-J7
Holding a bearing marked NSK UCP213-208D1 or NTN UCP213-208 or AMI UCP213-40? Ours is UCP213-40-J7 — the same seat size, the same type and the same sealing and clearance design.
What this bearing is
UCP213-40-J7 is a Plummer block housing unit with a 63.5 × 120 × 65.1 mm seat, execution: open. The manufacturer's cross-reference catalogue confirms full interchangeability for 6 designations, including NSK UCP213-208D1, NTN UCP213-208, NTN UCP213-208D1. For 1 designation (DODGE 126819) interchangeability is conditional — the difference usually lies in radial clearance or cage design, so compare the data sheets before fitting.
Designation equivalents
⌀63.5 × 120 × 65.1 mm
Before you replace it
This is a dimensional and design equivalent: the same seat size, the same bearing type and the same sealing and clearance design. It is not the same product — load ratings, tolerance class and grease may differ between manufacturers. For duty close to the limits or a critical application, check the datasheet of the specific design.
Where these equivalents come from
The base number of a standard bearing is an ISO standard — 6205 is 6205 at every manufacturer. Only the suffixes describing the design differ, and those are what we translate: shields, contact seals, cage and radial clearance. Designations that mean different things at different makers are deliberately omitted.