UCP205-13-J7
Holding a bearing marked NTN UCP205-013 or PEER UCP205-13? Ours is UCP205-13-J7 — the same seat size, the same type and the same sealing and clearance design.
What this bearing is
UCP205-13-J7 is a Plummer block housing unit with a 20.638 × 52 × 34.1 mm seat, execution: open. The manufacturer's cross-reference catalogue confirms full interchangeability for 3 designations, including NTN UCP205-013, NTN UCP205-013D1, PEER UCP205-13.
Designation equivalents
⌀20.638 × 52 × 34.1 mm
Before you replace it
This is a dimensional and design equivalent: the same seat size, the same bearing type and the same sealing and clearance design. It is not the same product — load ratings, tolerance class and grease may differ between manufacturers. For duty close to the limits or a critical application, check the datasheet of the specific design.
Where these equivalents come from
The base number of a standard bearing is an ISO standard — 6205 is 6205 at every manufacturer. Only the suffixes describing the design differ, and those are what we translate: shields, contact seals, cage and radial clearance. Designations that mean different things at different makers are deliberately omitted.