Bearings 240 × 500 × 95 mm
10 items fitting a seat with 240 mm bore, 500 mm outside diameter and 95 mm width. All genuine FAG and INA, with manufacturer technical data.
This seat holds 10 items: 4 × cylindrical roller bearing, 3 × deep groove ball bearing, 2 × four-point contact bearing and 1 × angular contact ball bearing. They come with C3 and CN clearance.
How items of the same size differ
One seat size comes in several designs. The suffix tells them apart: 2Z means shields on both sides, 2RSR contact seals, C3 a clearance greater than normal (for higher operating temperatures); no clearance suffix means normal CN. For dirty environments choose contact seals, for high speed a shield.
How to measure a bearing
The bore d takes the shaft, the outside diameter D sits in the housing, B is the ring width. Measure with a caliper on a cold, cleaned bearing; catalogue sizes are whole millimetres or halves, so a reading of 24.97 mm means 25 mm.
Common questions about this size
- Which bearing has dimensions 240 × 500 × 95 mm?
- 10 items in our catalogue fit this seat — among them NJ348-E-TB-M1-C3, NJ348-E-TB-M1 and 6348-M-J30PC-C3. The base number is shared across manufacturers; only the suffixes describing the design differ.
- Which of them are in stock?
- Nothing in this size is held in stock — every item is brought in to order. The delivery date is stated on each item's page.