- Axial runout
- 2.5 µm
- Basic dynamic load rating, axial
- 203000.0 N
- Basic static load rating, axial
- 500000.0 N
- Bore diameter lower tolerance
- -0.005 mm
- Bore diameter upper tolerance
- 0.0 mm
- Connection thread for lubrication
- M6
- Contact angle
- 60.0 °
- Distance of extraction slot
- 99.0 mm
- Fatigue load limit, axial
- 30500.0 N
- Fixing holes diameter
- 11.0 mm
- Limiting speed for grease lubrication
- 3500.0 1/min
- Marketing category
- XL
- Maximum diameter of housing
- 98.0 mm
- Minimum chamfer dimension
- 0.6 mm
- Minimum diameter shaft
- 63.0 mm
- Number of bearings
- 2AP
- Number of holes in adjacent construction
- 12.0
- Operating temperature max.
- 120.0 °C
- Operating temperature min.
- -30.0 °C
- Outside diameter lower tolerance
- -0.1 mm
- Outside diameter upper tolerance
- 0.0 mm
- PFAS
- nein
- Pitch circle diameter fixing holes
- 113.0 mm
- Pitch quantity of fixing holes
- 12.0
- Pitch separation angle of fixing holes
- 30.0 °
- Pitch separation angle of holes in adjacent construction
- 30.0 °
- Position tolerance of bore in the housing
- 0.2 mm
- REACH
- REACH_YES_597-82-0!
- Recommended INA precision locknut for axial locking
- AM50
- Recommended INA precision locknut for radial locking
- ZMA50/75
- Required locknut force axial
- 28451.0 N
- Rib diameter inner ring
- 80.0 mm
- RoHS
- RoHS compliant
- Sealing
- 2Z
- Size of fixing screws
- M10X120
- Thermally safe operating speed
- 2500.0 1/min
- Tightening torque for the recommended INA precision locknut
- 150.0 Nm
- Width lower tolerance
- -0.5 mm
- Width of extraction slot
- 3.0 mm
- Width upper tolerance
- 0.0 mm
